Wearmaster Masonry Surface Sealer *Performance Line* is a water-based acrylic sealer specifically formulated to protect concrete, quarry tile, grout, marble, terrazzo and masonry surfaces. Wearmaster is easy and economical to apply, produces no solvent odor, and dries to a durable wear-resistant finish. This sealer protects hard surfaces from soil, rubber marks, oil, grease and most solvents, while preventing dusting of concrete.
APPLICATION & USES
Use Wearmaster on all concrete, stone, and masonry surfaces where a durable wear-resistant finish is required. Wearmaster has excellent adhesion without acid etching, no solvent odor, and is fast drying. This penetrating sealer will prevent the "dusting" of concrete and stone surfaces.
DIRECTION FOR USE
Floor Preparation: Do not apply on concrete less than 30 days old. Clean and rinse floor thoroughly. Floor must be clean of soil, dirt, oil, and grease to insure a strong bond with Wearmaster Masonry Surface Sealer. Acid etching is not required for bonding. Floor must be clean and thoroughly dry.
Application: For best results, apply with a string mop or airless sprayer. Allow 45 minutes to 2 hours drying time between coats. NOTE: Never pour unused portion into original container; it will contaminate unused product.
- Milky liquid
- Slip Resistance
- 0.5 (James Machine)
- Heat stable, keep from freezing
- Coverage Rate
- 1500 - 2000 SQ/FT per Gallon
FEATURES & BENEFITS
- No offensive solvent odor
- Excellent adhesion without etching
- Fast drying and self leveling
- Penetrating seal
- 4 x 1 Gallon Bottles
- 1 x 5 Gallon Pail
(4) x 1 Gallon Bottles
(1) X 5 Gallon Pail