(Click to Enlarge)

How to Purchase?

For a quote or place an order, please call
(800) 486-7268
or email

Super Stripper No-Rinse Stripper

Super Stripper No-Rinse Stripper is chemically active floor finish stripper which quickly dissolves all water-based floor finishes. No rinsing is required. The chemicals do the work for you. This stripper reduces the lengthy time required for floor stripping. Just mop it on, wait a few minutes, agitate, then remove the liquefied finish with a squeegee equipped wet vac. The residual stripper film on the floor will evaporate completely. Super Stripper may be applied by mop or auto scrubbing machine and is intended for professional use only.


Safe to use on most resilient floor surfaces including vinyl, terrazzo, marble and quarry tile. Not intended for use on asphalt tile, rubber tile, linoleum or wood. NOTE: Do not allow Super Stripper to dry on the floor at any time or the finish will be redeposited on the floor as spots. Keep wet with stripping solution. Large floors should be stripped in sections to insure that the product does not dry out. Make sure no puddles of stripper remain along aisles, walls or corners.


Apply solution liberally to floor with a mop or automatic scrubber. Allow at least 15 minutes contact time for stripper to remove finish. A thick application is necessary to dissolve the finish. Aged finishes with many coats will require the use of a stripping pad and floor machine. A light coating of finish can be removed by mop agitation. Remove the dissolved finish with a squeegee equipped wet vac or auto scrubber.

NOTE: Thicker finishes require longer residence time or thicker application.


Clear, colorless liquid
Freeze/Thaw stable
Coverage Rate
800 - 1000 SQ/FT per Gallon


  • "No-Rinse" formula
  • Leaves no residue
  • Easy to use - mop on, vac off
  • Industrial strength


4 x 1 Gallon Bottles
1 x 5 Gallon Pail


  • Water [ CAS# 7732-18-5 - Function: Carrier ]
  • Benzyl Alcohol [ CAS# 100-51-6 - Function: Solvent ]
  • Monoethanolamine [ CAS# 141-43-5 - Function: pH adjuster ]
  • 3-Methoxy-3-Methyl-1-1-Butanol [ CAS# 56539-66-3 - Function: Solvent ]
  • Tall Oil Fatty Acid [ CAS# 61790-12-3 - Function: Surfactant ]
  • Tetrasodium Iminodisuccinate [ CAS# 144538-83-0 - Function: Chelant]
  • Diethanolamine [ CAS# 111-42-2 - Function: Impurity ]


Use the buttons Above to select the category of Product required. If you are unsure, please click "All Products"